Home | Contact | Türkçe
Registration to Master of Science Program


Türkçe    

NEW M.S. STUDENTS
  1. Pick up the following documents from room E-201 (Student Affairs Office of the Mechanical Engineering Department).
    • 3 copies of thesis protocol (4 copies if you have a co-supervisor)
    • 1 copy of pre-registration form (for courses)
    • 1 copy of "Öğrenci İzleme Kartı"
  2. Follow the instructions given in "Öğrenci Danışmanları Kayıt Rehberi". Have all of the documents mentioned in step (1) filled completely and signed properly. Do not forget to take the non-credit courses ME 8XX, ME 9XX, and ME 500 (see the list below). You should register to section 1 for ME 8XX and ME 9XX; and section XX for ME 500. For example, if your thesis supervisor is Dr. Reşit Soylu, then you should register to ME 829 (section 1), ME 929 (section 1) and ME 500 (section 29).
  3. See Mr. Bedrettin Aydemir (Room E-201) for the approval of thesis protocols.
  4. Register interactively (see the categories of courses below) by using:
    1. the PC's in the terminal rooms (A-Block in Mechanical Engineering, Civil Engineering, Physics Departments etc.) or,
    2. any PC (connected to the web) via the URL address http://register.metu.edu.tr/.
  5. Report to your thesis advisor with all of the documents and 2 recent photographs of yours with your name written at the back and get the approval of your registartion interactively.
CONTINUING M.S. STUDENTS
  1. Pick up the following document from room E-201 (Student Affairs Office of the Mechanical Engineering Department).
    • 1 copy of Pre-registration form (for courses)
  2. Follow the instructions given in "Öğrenci Danışmanları Kayıt Rehberi". Have all of the documents mentioned in step (1) filled completely and signed properly. Note that each MS student must take the non-credit courses ME 8XX, ME 9XX, and ME 500 (see the list below). You should register to section 1 for ME 8XX and ME 9XX; and section XX for ME 500. For example, if your thesis supervisor is Dr. Reşit Soylu, then you should register to ME 829 (section 1), ME 929 (section 1) and ME 500 (section 29).
  3. If you are taking a new course (with a new code number) to replace a course previously taken, you have to perform the replacement procedure during the interactive registration. 
  4. Register interactively (see the categories of courses below) by using:
    1. the PC's in the terminal rooms (A-Block in Mechanical Engineering, Civil Engineering, Physics Departments etc.) or,
    2. any PC (connected to the web) via the URL address http://register.metu.edu.tr/.
  5. Report to your thesis advisor with your pre-registration form and get the approval of your add-drop interactively.
CATEGORIES OF COURSES
   
Math Course: ME 521 / ES 501 / AEE 501 / MATH 583 / MATH 587 / PHYS 503 Must Course
ME 500 Must Course
ME 590 Must Course
All other courses Technical Elective

PROCEDURE FOR REGISTERING TO NON - ME COURSES (other than ES 501, AEE 501, MATH 583, MATH 587, PHYS 503) AND ME 4XX COURSES:
  1. Pick up the "Bölüm Dışı Ders Alma İstem Formu" from room E-201.
  2. Have the form filled and signed by your thesis supervisor and hand it back to room E-201 at the end of the first day of the add-drop period, the latest. Note that, in your M.S. program, you can only take
  3. up to
    • 2 ME 4XX courses or
    • 1 ME 4XX course and/or 1 non-ME 5XX course (excluding math courses)
  4. If your request is approved, add the non-ME and/or ME 4XX course(s) during the Add-Drop period (i.e., you should not register to these class of courses during the regular registration).
ADD-DROP FOR M.S. STUDENTS:
  1. If your registration has been approved and if you are not going to change anything, then you don't have to do anything during the add-drop period.
  2. If you want to add or drop a course (other than ME 8XX, ME 9XX, ME 500), you must fill in the pre-registration form (may be picked from room E-201) and have it signed by your thesis supervisor. The form should contain the courses that you will eventually take this semester (NO EXCEPTIONS TO THIS RULE). Remember that unless you have passed 3 courses, you must register for at least three courses with credit.
  3. Make your interactive add-drop by using:
    1. the PC's in the terminal rooms (A-Block in Mechanical Engineering, Civil Engineering, Physics Departments etc.) or,
    2. any PC (connected to the web) via the URL address http://register.metu.edu.tr/.
  4. Report to your registration advisor get the approval of your add-drop interactively.
CODES FOR ME 8XX AND ME 9XX
     
Metin Akkök 819 919
M. Haluk Aksel 825 925
Kahraman Albayrak 816 916
Ömer Anlağan 849 949
M. A. Sahir Arıkan 832 932
Faruk Arinç 806 906
Derek K. Baker 851 951
R. Tuna Balkan 835 935
A. Demir Bayka 805 905
Ender Ciğeroğlu 861 961
Kerep Civci 860 960
Mehmet Çalışkan 820 920
Tahsin Çetinkaya 830 930
Serkan Dağ 848 948
Haluk Darendeliler 836 936
Melik Dölen 846 946
Bülent Doyum 826 926
Zafer Dursunkaya 840 940
O. Cahit Eralp 813 913
Merve Erdal 845 945
Mustafa İ. Gökler 833 933
Kemal İder 838 938
Suat Kadıoğlu 841 941
Bilgin Kaftanoğlu 809 909
Engin Kılıç 827 927
Buğra Koku 852 952
İlhan Konukseven 842 942
Tuba Okutucu Özyurt 857 957
Süha Oral 834 934
Rüknettin Oskay 812 912
Gökhan O. Özgen 859 959
M. Kemal Özgören 823 923
H. Nevzat Özgüven 818 918
Levend Parnas 839 939
Bülent E. Platin 828 928
Cüneyt Sert 853 953
Reşit Soylu 829 929
Eres Söylemez 810 910
İlker Tarı 843 943
Ergin Tönük 844 944
S. Turgut Tümer 821 921
Abdullah Ulaş 847 947
Y. Samim Ünlüsoy 815 915
Hüseyin Vural 837 937
Cemil Yamalı 817 917
Almıla Güvenç Yazıcıoğlu 854 954
Yiğit Yazıcıoğlu 855 955
A. Orhan Yeşin 802 902
Tülay Yeşin 808 908
R. Orhan Yıldırım 814 914
Ahmet Yozgatlıgil 858 958
Hafit Yüncü 811 911

Major
Double Major
Minor on Production
Minor on Mechatronics
Self Assessment
ABET Studies
Graduate
Master's
Doctoral
 
 
 
 
 
 
 
 
 
 
 
 
 

This page was modified on 28 October 2008 / Tuesday 14:43

 

Home - Info - People - Courses - Programs - Research - Contact