Synthesis Gas Production using Non-Thermal Plasma Reactors, Dr. Onur Taylan. May 31, 2013 __ posted on 21 May 2013

Multiscale Modeling of Advanced Materials, Dr. Emrah Demirci. May 9, 2013 __ posted on 6 May 2013

Design of Heat Sink for Power LED Lighting, Gökay Sedef. April 12, 2013 __ posted on 9 April 2013

Development of an Engine Support Structure, Aydın Kuntay. April 12, 2013 __ posted on 9 April 2013

Developing Effective Presentation Skills and Powerful Presentations, Dr. Tarkan Gürbüz. April 12, 2013 __ posted on 9 April 2013

Academic Writing, Ayşem Karadağ-Ötkür. April 12, 2013 __ posted on 9 April 2013

Novel Perspectives on Stability of Time-Delayed Systems (TDS) and Practical Implications, Prof. Dr. Nejat Olgaç. March 22, 2013 __ posted on 18 March 2013

An Overview of Activities in High SuperSonic Tunnel (HSST) of the AeroPhysics Lab in the University of Manchester, Dr. Erinc Erdem. December 28, 2012 __ posted on 19 December 2012

Energy Sustainability: A Combustion Perspective, Prof. Dr. Suk Ho Chung. October 9, 2012 __ posted on 6 November 2012

Materials Science on the Atomic Scale: Three-Dimensional Atomic Force Microscopy and its Applications, Asst. Prof. Dr. Mehmet Z. Baykara. September 28, 2012 __ posted on 24 September 2012

Wind Turbine Drivetrain Fault Diagnosis Using Vibration, Dr. Tugan Eritenel. September 05,2012 __ posted on 31 August 2012

Multi Scale Modeling Inspired by Hierarchical Biological Materials, Dr. Melis Arslan. June 15, 2012. __ posted on 12 June 2012

Experimental Investigations on the Effects of Low Profile Vortex Generators in a Compressor Cascade, F. Ceyhun Sahin. May 18, 2012. __ posted on 14 May 2012

Mathcad Kullanımı ve Mathcad'in Makina Müh. Alanındaki Uygulamaları, Dr. Ender Ciğeroğlu. March 30, 2012. __ posted on 26 March 2012

Current Gaps and Future Directions in Gear Research by Prof. Dr. Ahmet Kahraman. January 20, 2012. __ posted on 9 January 2012

Very High Dynamic Range Resonant MEMS Load Cells for Micromechanical Test Frames by Dr. Kıvanç Azgın. December 30, 2011. __ posted on 14 December 2011

The Electrothermal Modeling of Gallium Nitride Heterostructure Field Effect Transistor (HFET) Devices by F. Nazli Donmezer. December 28, 2011. __ posted on 13 December 2011

Microfluidic Refrigeration Platforms: Strengths and Limitations by Prof. Dr. Boris V. Kosoy. November 3, 2011. __ posted on 28 October 2011

Mathcad for Mechanical Engineers by Dr. Ender Ciğeroğlu. October 21, 2011. __ posted on 17 October 2011

Information Centric Frameworks for Emerging Process Domains by Asst. Prof. Dr. J. Cecil. October 12, 2011. __ posted on 27 September 2011

Simulation of Refrigerated Space with Radiation, Heat Conduction Calculations for a Novel Nano-Radiation Device Design & Experimental Research for the Optimization of a Unique Refrigeration Unit Integrated in All-In-One Water Appliances by Dr. Özgür Bayer. September 16, 2011. __ posted on 13 September 2011

Automotive Engineering: Hybrid Electric Vehicle Research in the Context of the EcoCAR Vehicle Competition, Conducted at the Center for Automotive Research, the Ohio State University by Dr. Kerem Bayar. September 5, 2011. __ posted on 26 August 2011

Latest Developments in Two Emerging Areas of Turbomachinery: “Supersonic Flow Compressor” & “Micro Gas Turbine" by Dr. Sabri Deniz. August 25, 2011. __ posted on 24 August 2011

Introduction to Compressive Sampling by Dr. Ali Sekmen. July 12, 2011. __ posted on 4 July 2011

Subspace Clustering and High-Dimensional Data Analysis by Dr. Ali Sekmen. July 5, 2011. __ posted on 4 July 2011

Nonlinear Gear Dynamics in Real World Applications by Prof.Dr. Robert G. Parker. April 15, 2011. __ posted on 13 April 2011

Emission Legislations Oriented Engine Engineering and Alternative Propulsion Systems by Hamza Y. Dere and C. Gürsen Altın. April 7, 2011. __ posted on 30 March 2011

Mathcad For Mechanical Engineers by Dr. Ender Ciğeroğlu. March 11, 2011. __ posted on 3 March 2011

Atomistic to Micro Scale Mechanical Properties of Hierarchical Biological Materials by Dr. Melis Arslan. February 18, 2011. __ posted on 14 February 2011

Microsoft® Excel For Mechanical Engineers by Prof. Dr. Eres Söylemez. December 03, 2010. __ posted on 2 December 2010

Mathcad For Mechanical Engineers by Asst. Prof. Dr. Ender Ciğeroğlu. November 26, 2010. __ posted on 2 December 2010

Modeling and Applications of Piezoelectric Energy Harvesting by Dr. Alper Erturk. July 22, 2010. __ posted on 30 June 2010

High Speed Camera as a Vibration Measurement Tool, Case Study: Performance Measurement of Bi-Unit Impact Vibration Absorber by İlker Durukan. May 21, 2010. __ posted on 25 May 2010

Vibrations and Acoustics: Applications for Structures and Human Body by Dr. Mehmet Bülent Özer. May 28, 2010. __ posted on 25 May 2010

Wireless Distributed Sensing and Real Time Location Tracking for Automotive Factory Automation by Dr. Mert Bal. April 27, 2010. __ posted on 20 April 2010

Computational Human Body Modelling: Injury Prevention through Improved Design by Dr. Volkan Esat. April 28, 2010. __ posted on 20 April 2010

Computer Simulation of Backhand Groundstrokes in Tennis by Dr. Behzat Kentel. April 9, 2010. __ posted on 1 April 2010

Complex Flow Modeling and Flow Control by Dr. M. Metin Yavuz. March 05, 2010. __ posted on 2 March 2010

Measurement Techniques in Fluid Mechanics by Dr. Gökhan Ergin. December 25, 2009. __ posted on 16 December 2009

UMTIK 2010 - 14th International Conference on Machine Design and Production, June 29 - July 2, 2010, Güzelyurt, Northern Cyprus __ posted on 2 December 2009

Microsoft Excel for Mechanical Engineers by Prof.Dr. Eres Söylemez. November 13, 2009. __ posted on 11 November 2009

Advances in Forming of Light Metals by Dr. Serhat Kaya. November 06, 2009. __ posted on 27 October 2009

3rd Micro & Nano Technology and Micro/Nanoscale Energy Conversion & Transport-2010, March 21-24, 2010, Seoul, South Korea __ posted on 14 October 2009

Applications of Clifford (Geometric) Algebras to Kinematics by Gökhan Kiper. October 15, 2009. __ posted on 8 October 2009

Marker-Based, 3-D Adaptive Cartesian Grid Method for Multiphase Flows around Irregular Geometries by Dr. Eray Uzgoren. July 1, 2009. __ posted on 29 June 2009

İleri Seviye Microsoft Office Excel Kullanımı by Prof. Dr. Eres Söylemez. June 12, 2009. __ posted on 3 June 2009

Numerical Simulation of Mixing in Microfluidic Systems by Prof. Dr. Ali Beşkök. June 05, 2009. __ posted on 26 May 2009

AC Electrokinetic Manipulation of Colloids & Biological Particles in Microfluidic Systems by Prof. Dr. Ali Beşkök. June 05, 2009. __ posted on 26 May 2009

TOK 2009, Otomatik Kontrol Ulusal Toplantısı, 13-16 Ekim 2009, Yıldız Teknik Üniversitesi, İstanbul __ posted on 15 May 2009

Process Planning and Decisions & Just-in-Time Material Requirement Planning (MRPI & MRPII) by Dr. Samad Dadvandipour. May 14, 2009. __ posted on 13 May 2009

MS Excel and the Use of Macros in Excel for Mechanical Engineers by Prof. Dr. Eres Söylemez. March 13, 2009. __ posted on 9 March 2009

Microfluidic Continuous Particle Separation by Using AC-Dielectrophoresis by Barbaros Çetin. March 13, 2009. __ posted on 9 March 2009

ME 590 Seminars __ posted on 14 November 2008

UMTS 2009, 14. Ulusal Makina Teorisi Sempozyumu, 02-04 Temmuz 2009, Güzelyurt, KKTC __ posted on 14 November 2008

Radiative Transfer, RAD-10, 13-19 June 2010, Antalya, Turkey __ posted on 17 October 2008

Turbulence, Heat and Mass Transfer, THMT-09, 14-18 September 2009, Rome, Italy __ posted on 17 October 2008

Heat Transfer in Gas Turbine Systems, Turbine-09, 09-14 August 2009, Antalya, Turkey __ posted on 17 October 2008

Convective Heat & Mass Transfer in Sustainable Energy, CONV-09, 26 April-01 May 2009, Hammamet, Tunisia __ posted on 17 October 2008

Seminer: TU Darmstadt Otomotiv Enstitüsü'nde Yüksek Lisans Eğitimi Hakkında Bilgilendirme Sunumu __ posted on 27 May 2008

Characterization to Patterning: Engineering at Small Scales by Pınar Mengüç. May 29, 2008. __ posted on 25 May 2008

Seminer: Talaşlı Ortamda Yüksek Verimli Talaşlı İmalat __ posted on 21 May 2008

Seminar: Characterization to Patterning: Engineering at Small Scales __ posted on 21 May 2008

UMTIK 2008, 13th International Conference on Machine Design and Production __ posted on 25 April 2008

Üniversite-Sanayi İşbirliği Ulusal Kongresi-2008 __ posted on 8 April 2008

Katlanabilir Germe-Sürekli (Tensegrite) Yapılar by Gökhan Kiper. February 29, 2008. __ posted on 29 February 2008

Sanal Ortamda Yüksek Verimli Talaşlı İmalat by Yusuf Altıntaş. June 2, 2008. __ posted on 1 February 2008

Ulusal Bor Araştırma Enstitüsü (BOREN) ve Bor Projeleri by Erk İnger. December 27, 2007. __ posted on 27 December 2007

Soğuk Dövme’de Sonlu Eleman Analizi (FEM) Uygulamaları by Canderim Önder. December 14, 2007. __ posted on 14 December 2007

Development of a Next-Generation Collaboratory Learning Environment, Dr. Nebil Buyurgan. December 12, 2007. __ posted on 12 December 2007

“Hi y’all?” or Graduate Study in Lubbock, USA, Dr. Stephen Ekwaro-Osire. November 5, 2007. __ posted on 5 November 2007

A Modified Weibull Failure Theory for Engineering and Biological Structures, Dr. Stephen Ekwaro-Osire. November 5, 2007. __ posted on 5 November 2007

Stability of Linear Time Invariant-Time Delayed (LTI-TDS) Systems and Practical Implications , M. Emre Çavdaroğlu. July 26, 2007. __ posted on 26 July 2007

Fluid Mechanics and Heat Transfer Experiments in the Large Scale Mock Up of the Microfabricated Stirling Engine Regenerator, Dr. Liyong Sun. July 3, 2007. __ posted on 3 July 2007

Recent Developments in Russian Micro- And Nano- Technology, Prof. Henry Smyrnov. June 14, 2007. __ posted on 14 June 2007

Architecting Control Software for an Instrument Product Platform in Life Sciences Industry, Dr. H. Özgür Ünver. May 25, 2007. __ posted on 25 May 2007

1. ODTÜ Kalp-Damar Biyomekaniği Yaz Çalışma Toplantısı __ posted on 20 April 2007

Application of Fractional Calculus in Diffusion Weighted MRI, Prof.Dr. Richard L. Magin. April 11, 2007. __ posted on 11 April 2007

Human-centric Intelligent Computational Tools for Engineering Design, Analysis, and Education, Dr. Levent Burak Kara. March 16, 2007. __ posted on 16 March 2007

Inverse Design and Control of Thermal Systems, Dr. Hakan Ertürk. December 29, 2006. __ posted on 29 December 2006

Modeling Microslip Friction and its Application to Forced Response Prediction of Turbine Blades, Dr. Ender Ciğeroğlu. December 26, 2006. __ posted on 26 December 2006

Experimental Identification of Damping in Mechanical Systems, Dr. Gökhan Özgen. November 3, 2006. __ posted on 3 November 2006

The Mechanics of Metallic Lattice Core Sandwich Materials, Dr. Francois Cote. October 13, 2006. __ posted on 13 October 2006

Quenching Stresses in Bulk Metallic Glasses and Investigation of Plasticity in Multilayers by in-situ Synchrotron X-ray Diffraction, Dr. Can Aydıner. September 12, 2006. __ posted on 12 September 2006

Burning and Sooting Behavior of Ethanol Droplet Combustion Under Microgravity Conditions, Dr. Ahmet Yozgatlıgil. May 24, 2006. __ posted on 24 May 2006

Türkiye'de ve Dünya'da Enerji Sorunu by Haluk Direskeneli. May 9, 2006. __ posted on 9 May 2006

ODTÜ Tarihi ve Makina Mühendisliği Bölümünün Kuruluşu ve Gelişimi by Prof.Dr. Bilgin Kaftanoğlu. April 13, 2006. __ posted on 13 April 2006

Avrupa Birliği Yedinci Çerçeve Programına Doğru by Prof.Dr. Faruk Arınç. April 7, 2006. __ posted on 7 April 2006

Mühendislik Eğitimindeki Yeni Akımlar ve Üniversitelerde Yapılan Bilimsel Araştırmaların Eğitimdeki Yeri by Prof.Dr. Kazım Akyüzlü. April 6, 2006. __ posted on 6 April 2006

Introduction to Operational Modal Analysis, Harry Zaveri. September 22, 2005. __ posted on 22 September 2005

Vibro-Acoustic Radiation From A Fluid-Filled Viscoelastic Cylindrical Shell With Internal Turbulent Flow, Dr. Yiğit Yazıcıoğlu. June 13, 2005. __ posted on 13 June 2005

TÜBİTAK'ın Yeni Destekleme Programlarının Tanıtımı by Prof.Dr.Ömer Anlağan. June 9, 2005. __ posted on 9 June 2005

Mechanics and Dynamics of Mechanical Micromachining & Development of Miniature Machine Tools (MMT), Dr. Burak Özdoğanlar. June 2, 2005. __ posted on 2 June 2005

Predictive Biomechanical Analysis: Potentials of Multi-Modal Simulation Approaches, Dr. Ahmet Erdemir. May 3, 2005. __ posted on 3 May 2005

Modeling of Transport in Polymer Electrolyte Membrane Fuel Cells (PEMFC), Dr. Serhat Yeşilyurt. April 22, 2005. __ posted on 22 April 2005

Parallel CFD - CSD Coupling For Aeroelasticity Problems, Dr. Erdal Oktay. January 5, 2005. __ posted on 5 January 2005

Hesaplamalı Akışkanlar Dinamiği ve Pompa/Vana İmalat Sanayiinde Kullanımı by Dr. Ertuğrul Başeşme. December 10, 2004. __ posted on 10 December 2004

Design Considerations and Performance Evaluation of a Turbomachine by Means of Computational Fluid Dynamics (CFD ) Methods, Ahmet Açıkgöz. December 3, 2004. __ posted on 3 December 2004

Carbon Nanotubes: A Novel Platform to Study Fluids at The Nanoscale, Dr. Almıla G. Yazıcıoğlu. October 27, 2004. __ posted on 27 October 2004

Research Activities in Manufacturing and Production Systems Division in Politecnico di Milano, Prof. Michele Monno and Ali Erkin Kutlu. June 16, 2004. __ posted on 16 June 2004

How To Give a Seminar: Presenting Engineering Topics, Prof. Dr. Tayfun Akın. April 29, 2004. __ posted on 29 April 2004

Üniversite-Sanayi İşbirliğinde Makina Mühendisleri Odası’nın İşlevi by Prof. Dr. Kahraman Albayrak ve Ankara Şubesi Yönetim Kurulu Üyeleri. March 12, 2004. __ posted on 12 March 2004

Intellectual Property Rights, Sertaç Köksal & Şemsettin Eksert. March 8, 2004. __ posted on 8 March 2004

Science and Technology Policy of Turkey, Past, Present and the Future, Prof.Dr. Turgut Tümer. March 1, 2004. __ posted on 1 March 2004

Constructal Theory and Design: Optimal Flow Architecture, from Engineering to Nature, Prof. Adrian Bejan. December 8, 2003. __ posted on 8 December 2003

Engineering at the University of Waikato, Hamilton, New Zealand, Prof. Thomas Neitzert. November 4, 2003. __ posted on 4 November 2003

A Computational Investigation of the Multiaxial Strength and Micromechanics of Human Bone, Dr. Harun Bayraktar. September 15, 2003. __ posted on 15 September 2003

Driving Dynamics Simulation and Testing at DaimlerChrysler, Klaus Wüst. July 3, 2003. __ posted on 3 July 2003

Nonconforming Formulations with Spectral Element Methods and Applications in Microfluidics, Dr. Cüneyt Sert. June 13, 2003. __ posted on 13 June 2003

Hocalarla Söyleşiler - II by ODTÜ Makina Mühendisliği Öğretim Üyeleri. May 2, 2003. __ posted on 2 May 2003

Mezunlarla Söyleşiler - II by Öner Ersay, Behiç Okan, Tamer Şenyuva, Ethem Özbakır. April 25, 2003. __ posted on 25 April 2003

Hocalarla Söyleşiler - I by ODTÜ Makina Mühendisliği Öğretim Üyeleri. April 11, 2003. __ posted on 11 April 2003

Patent Systems and Patent Filing, Gerd A. Hedemann & İsmet Olcay Yıldırım. April 7-8, 2003. __ posted on 7 April 2003

Insect Inspired Robotics, Dr. Erol Şahin. April 4, 2003. __ posted on 4 April 2003

ICEM CFD - Mesh Generator Software Demonstration, David Minns. March 26, 2003. __ posted on 26 March 2003

Mezunlarla Söyleşiler - I by Levend Tosun & Cihangir Yıldırım. March 14, 2003. __ posted on 14 March 2003

Supercritical Airfoil Design For Future Hale Concepts, Dr. Kasım Biber. January 30, 2003. __ posted on 30 January 2003

A Short Course on Fundamentals and Simulations of Micro and Nano Flows, Dr. Ali Beşkök. December 19-20, 2002. __ posted on 18 December 2002

A Review of Microfluidic Transport: Physical Challenges and Numerical Simulation, Dr. Ali Beşkök. December 18, 2002. __ posted on 18 December 2002

A Surface Wear Prediction Model for Helical Gear Pairs, Dr. Ahmet Kahraman. July 3, 2002. __ posted on 3 July 2002

Recent Developments in Metal Forming Technology, Prof. Reiner Kopp. June 28, 2002. __ posted on 28 June 2002

Hesaplamalı Akışkanlar Dinamiği (CFD) Konusundaki Gelişmeler ve STAR-CD Yazılımı, Prof. David Gosman & Dr. Riaz Sanatian. May 28, 2002. __ posted on 28 May 2002

Laboratory Experiments for Mechatronics Education, Dr. Mark Nagurka. May 24, 2002. __ posted on 24 May 2002

Tools for Investigating the Dynamics of Mechanical Systems, Dr. Mark Nagurka. May 24, 2002. __ posted on 24 May 2002

An Informative Session on “Research Opportunities in Advanced Materials Processing for Mechanical Engineers” , Asst.Prof.Dr. Merve Erdal. May 24, 2002. __ posted on 24 May 2002

Quantitative Visualization Challenges: Blood Velocity by Micro PIV and Free-surface Turbulence, Prof. Koji Okamoto. May 3, 2002. __ posted on 3 May 2002

ME Lecture Series, Dr. Betzalel Avitzur, Dr. Stan M. Hoogenboom, Dr. Jan Alphons Hubert Ramaekers. April 29, 2002-May 9, 2002. __ posted on 29 April 2002

Research Focus at the Nanomanufacturing Research Institute and the NSF Center on Nano and Microcontamination at Northeastern University, Dr. Ahmed A. Busnaina. April 12, 2002. __ posted on 12 April 2002

Advanced Reading for Better Writing, ODTÜ Akademik Yazım Merkezi. April 5, 2002. __ posted on 5 April 2002

Preparing and Delivering Effective Presentations, ODTÜ Akademik Yazım Merkezi. April 5, 2002. __ posted on 5 April 2002

ME101 Engineering Graphics Dersinin Web Üzerinden Verilmesi için Geliştirilen bir Model by Dr. İlhan Konukseven. June 25, 2001. __ posted on 11 March 2002

ME101 Engineering Graphics Dersinin Web Üzerinden Verilmesi için Geliştirilen bir Model by Dr. İlhan Konukseven. June 25, 2001. __ posted on 8 March 2002

An informative session about the graduate course ME 587 Perturbation Methods in Engineering, Prof.Dr. Zafer Dursunkaya. December 14, 2001. __ posted on 14 December 2001

Computational Fluid Dynamics Modeling of Turbulent Cavitating Flows, İnanç Şenocak. December 13, 2001. __ posted on 13 December 2001

Overview of Autodyn-2D & -3D FE Software Package, Olivier Meuric. November 16, 2001. __ posted on 16 November 2001

Computational Fluid Dynamics Applied To Aerospace Vehicle Design, Prof. Charles Hirsch. October 31, 2001. __ posted on 31 October 2001

Virtual Metal Forming, Prof. Dr.-Ing. Karl Roll. October 10, 2001. __ posted on 10 October 2001

Vom Design zum Blechteil (in German), Prof. Dr.-Ing. Karl Roll. October 10, 2001. __ posted on 10 October 2001

İnternet Üzerinden Mekanizma Tekniği Eğitimi by Prof.Dr. Eres Söylemez. September 28, 2001. __ posted on 28 September 2001

Crack and Contact Problems in Graded Materials by Serkan Dağ. September 13, 2001. __ posted on 13 September 2001

Overview of Research Studies at the Manufacturing Automation Laboratory, University of British Columbia by S.Doruk Merdol. August 15, 2001. __ posted on 15 August 2001

General Trends in Gear Research & A Theoretical and Experimental Study of Nonlinear Gear Pair Dynamics by Dr. Ahmet Kahraman. July 13, 2001. __ posted on 13 July 2001

Combustion Studies of Solid Propellants and Energetic Materials for Rocket Propulsion and Gas-Generation Systems by Dr. Abdullah Ulaş. June 25, 2001. __ posted on 25 June 2001

Otobüslerde Polimer Uygulamalarından Örnekler by Dipl.Ing. Harald Krimmling and Dipl.Ing. Mehmet Erkiner. May 25, 2001. __ posted on 25 May 2001

Türkiye'de Araştırma-Geliştirme Faaliyetleri ve Tübitak - SAGE'nin Çalışmaları by Prof.Dr. Ömer Anlağan. April 27, 2001. __ posted on 27 April 2001